☆Z軸增加絲杠螺母固定好，穩定性好確保精度
☆Z axis to increase screw nut fixed good, good stability to ensure accuracy
☆4條經絡骨結構剛性好，不易變形
☆The four meridians are rigid and do not deform easily
☆吸塵 aspiration
科學化的吸塵設計，吸塵口傾斜度為45度，并且可上下調整，確保最佳的吸塵能力
Scientific dust absorption design, the inclined level of the suction mouth is 45 degrees, and can be adjusted up and down to ensure the best dust absorption capacity
☆防塵 dust
直接鑄件防塵，嚴密的防塵設計是其他易變形塑膠制品無法比凝的。防塵的優劣直接關系到機床的精度和機床的壽命
Direct casting dust - proof, strict dust - proof design is other flexible plastic products can not be more than coagulation. The quality of dustproof is directly related to the precision of the machine tool and the life of the machine tool
☆鑄件 The casting
壁厚15mm以上重達850公斤（較其他同型磨床增加了30%）的優良鑄件，大大的提高了機床的穩定性，確保機床的整體剛性
Excellent casting with wall thickness of 15mm or more and weight of 850 kg (30% more than other similar grinding machines) greatly improves the stability of the machine tool and ensures the overall rigidity of the machine tool

規格(Specification)	FGM-618G
工作臺尺寸（Worktable)	150*457mm(6*18")
最大研磨長度(Maximum grinding length)	475mm(18-3/4")
最大研磨寬度(Maximum grinding width)	160mm(6-1/3")
主軸至工作臺面距離(Spindle to table distance)	350-400mm(13.8*15.7")定制最高可達430mm（350-400mm(13.8*15.7")customization up to430mm）
左右手動進給(Left and right manual feed)	485mm(19")
前后手動進給(Manual feed forward and backward)	180mm(7")
前后手動每刻度進給(Manual  feed per tick)	0.02mm(0.001")
前后手動每轉進給(Manual feed per revolution)	5mm(0.2")或3mm(0.1")（5mm(0.2")or3mm(0.1")）
升降手輪每刻度進給(The lifting handwheel feeds every tick)	0.005mm(0.0002")

升降手輪每轉進給(Lift handwheel per feed)	1mm(0.05")
砂輪尺寸（直徑*寬度*孔徑）(Wheel size(diameter X width X aperture)	180*16*32mm(7*2/3*1-1/4")
主軸速度(Spindle speed)	60Hz/50Hz-3600/3000rpm
主軸馬達(Spindle motor)	1.5/2Hp
凈重(net weight)	850kgs
裝箱尺寸(Packing size)	1550*1150*1980mm(55*45*78")